V-TAC 11505 three-phase multifunction smart meter SDT670 DIN mounting for Energy Consumption Monitoring

Name: V-TAC 11505 three-phase multifunction smart meter SDT670 DIN mounting for Energy Consumption Monitoring
SKU: 11505
Price: 172.63 EUR
Availability: InStock

In stock

SKU: 11505

Are you a Reseller? Register Here

Description

The SDT670 DIN rail power meter is specially designed for energy management systems (EMS) and photovoltaic plants. Due to its DIN rail installation it is suitable for use with switches and contactors.

It can measure all parameters of electrical networks, such as currents, voltages, active powers, reactive powers, apparent powers, frequency, power factors and energies of the 4 quadrants. It does not require an external CT, but can be connected directly up to 100Amp.

It has a 7-digit LCD display. Through the front button, users can easily change the display data. Each SDT670 has an RS485 interface and 2 pulse outputs, for transferring measurement data to other master devices, such as PLCs and data center computers. SDT670 has good cost performance, and as an intelligent unit and digital electrical data collection unit, it has been widely used in many intelligent systems.

Data sheet

Characteristics:

Measurement of 30 parameters on AC mains: AL1, AL2, AL3, VL1, VL2, VL3, VL1-2, VL2-3, VL3-1, fr, PL1, PL2, PL3, PL, QL1, QL2, QL, SL1, SL2, SL3, SL, PF1, PF2, PF3, PF, imp & exp kWh, L & C kvarh
With 7-digit LCD.
Input: 3x5A (connect CT), 3x20A, 3x32A, 3x100A,
Line: 3P2L (2x110V/220V);3P4L (3x120/220V, 3x220V/380V, 3x230V/400V); 3P3L (3x380V)
The 3x5A type can be used with CTs and the CT ratio is programmable;
With 2 pulse outputs (kWh, kvarh) and wire break alarm;
With RS485 interface (Modbus-RTU protocol);
Installation on standard 35 mm DIN rail
With the StandardeL PC software, the user can easily read the data of the SDT670 and program its parameters by computer. With low power and white LDC or 3 red LED display, which can be clearly visible in any gloomy space.

More Information