Spedizione 24/48H

Universal 2-channel radio receiver Self-learning 433.92 Mhz RX2-XL - gate automation

Name: Universal 2-channel radio receiver Self-learning 433.92 Mhz RX2-XL - gate automation
SKU: RX2-XL
Price: 33.2 EUR
Availability: InStock

In stock

SKU: RX2-XL

Are you a Reseller? Register Here

Description

Universal radio receiver 2 channel Self-learning 433.92 Mhz, manages standard codes from 12 to 64 bits and rolling HCS Nologo Cod. RX2-XL

The receiver can be powered from 12 to 24 Volts both in direct current and in alternating current. The antenna must be connected with the positive (core) on terminal n ° 1 and the negative (braiding) on terminal n ° 2. If only one wire is used (17cm for freq. 433.92 MHz / 8.5cm for freq. 868 Mhz), this must be connected to terminal n ° 1.
The Normally Open relay contact of output 1 is located on terminals 7 and 8 while the Normally Closed contact is on terminals 8 and 9.
For output 2 only the normally open contact is present on terminals 5 and 6. It is recommended not to connect these contacts to high voltages and make sure that the current on the contact does not exceed 1 ampere.
The receiver can manage up to 190 rolling transmitters up to 4 buttons per transmitter and up to 190 transmitters with standard code: 1 button per transmitter.
This receiver is able to manage the standard codes from 12 to 80 bits, the rolling codes type HCS © or type EB Rolling. The receiver manages the codes for each key of the remote control, therefore any key can be associated with any output.