Outdoor Wireless Detector 12m 90° 2xPIR battery-powered with Anti-Masking Optex VXI-RAM

Name: Outdoor Wireless Detector 12m 90° 2xPIR battery-powered with Anti-Masking Optex VXI-RAM
SKU: VXI-RAM
Price: 115.06 EUR
Availability: OutOfStock

Out of stock

SKU: VXI-RAM

Are you a Reseller? Register Here

Description

The VXI series is our best selling outdoor intrusion detection sensor range. It provides a very reliable approach detection with a range of up to 12m for residential and commercial applications. The sensor which should be mounted at ca 1.2m height includes two PIRs providing a double layered detection area, the sensor will only trigger when both layers are activated. The VXI sensors are animal tolerant and feature digital analysis to eclude cause of false alarm. The VXI-RAM is the battery-powered model with antimasking. Please note the wireless transmitter is not included.

Digital analysis for enhanced reliability
The VXI sensors features a digital microprocessor which analyses the infrared emissions received and differentiate the ones generated by human from the ones generated by sunlight, animals, vegetation sway, or weather conditions. This intelligence makes the risk of false alarm very low.

Flexible detection coverage
The detection length of the VXI sensors can be set to 12m, 8.5m, 6m, 5.5m or 2.5m to adapt to the site configuration. The sensor comes as well with a choice of pre-cut masking templates to modify the detection areas and only focus on the points of interest.

The convenience of wireless
The VXI-RAM sensor can be powered by a variety of universal batteries including CR123, CR2 and 1/2 AA. Its housing can accommodate most wireless radio transmitters available in the market. This makes it easy to add a VXI sensor onto the shed, garage or any outer buildings and link it to an existing wireless alarm panel The sensors are also easy to install in remote or temporary locations.

Key Features

12m battery-powered PIR for approach detection
Digital signal analysis to greater reliability
Accommodates most wireless transmitters
Active infrared antimasking

Data sheet

Model	VXI-RAM
Detection method	Passive infrared
PIR Coverage	12,0m (40ft) wide/16 zones
PIR distance limit	12 – 2,5 m ( 5 levels)
Detectable speed	0,3 – 1,5 m/s (1 – 5 ft/s)
Sensitivity	2.0°C (3.6°F) ar 0.6 m/s
Power input	3 – 9 V DC(Lithium or Alkaline Battery)
Current draw	10μA (standby) / 4 mA (max)at 3 V DC
Alarm period	2.0±1 sec.
Warm-up period	Approx. 60 sec. (LED blinks)
Alarm output	N.C. / N.O. Selectable-Solid State Switch 10 V DC 0.01 A (max)
Trouble output	N.C. / N.O. Selectable-Solid State Switch 10 V DC 0.01 A (max)
LED indicator	Disable: During normal operation. Enable: During WALK TEST or LED SW on. Red: Warm-up, alarm, masking detection (VXI-RAM only)
RF interfance	No alarm 10 V/m
Operating temperature	-20- +60°C (-4- +140°F)
Environment humidity	95%max.
Weatherproof	IP55
Mounting	Wall,Pole (Outdoor,Indoor)
Mounting height	0.8 – 1,2 m (2'7” - 3'11”)
Weight	500G (17.7 oz)
Accessories	Connector for POWER and ALARM, Connector for TROUBLE, Screw (4×20mm) ×2, Masking seal ×3