Irreversible Motor, 24 Vdc, with built-in control unit and inverter, with electromechanical limit switch, for sliding gates weighing up to 2500 kg. (RUN2500I).
Suitable to operate in extreme conditions, in systems for intensive use.
Simple to install: the BlueBUS system enables connections by means of just two wires between the control unit and up to 15 control safety and signalling devices.
Safe: the acceleration settings (at the start of the manoeuvre) and the deceleration settings (at the end of the manoeuvre) are precise and reliable.
The temperature sensor: Run is able to manage force, adapting it to the different climatic and environmental conditions, while adapting the thermal cut-out protection and intensity of self-ventilation, depending on the temperature reading.
A master/slave selection also automatically synchronises 2 motors, enabling the automation
of sliding gates with two opposing leaves.
Practical and functional: the control unit (and inverter on version RUN2500I), housed inside Run, can be simply connected by means of the practical connector guide.
Very quiet: gear motor on bearings.
RUN2500I version with built-in inverter.
Perfect movement: the inverter enables the power supply and drive of the 3-phase motor with single-phase current at 230 Vac, acting on the frequency to adjust speed of the automation from a minimum of 8.2 m/min to maximum 15.4 m/min. In the automation deceleration phase, the inverter, which dialogues with the control unit, increases the torque, thusimproving performance and reducing the risk of the automation blocking on impact with obstacles.